Product Description
1. High strength, due to the use of plastic fibers, it can maintain sufficient strength and elongation in both dry and wet conditions.
2. Corrosion resistance, able to withstand corrosion for a long time in soil and water with different acidity and alkalinity.
3. Good water permeability lies in the presence of gaps between fibers, resulting in excellent water permeability.
4. Good antimicrobial resistance, no damage to microorganisms or insect infestations.
5. Convenient construction, due to the light and flexible material, transportation, laying, and construction are convenient.
Product Parameters
Specification |
Test Method |
|
|
|
|
|
|
|
|
|
|
|
|
Index |
|
Unit |
100gsm |
130gsm |
150gsm |
200gsm |
250gsm |
300gsm |
350gsm |
400gsm |
500gsm |
600gsm |
800gsm |
Elongation |
ASTM D4595 |
% |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
Roll Width |
|
m |
1-6.2 |
Roll Length |
|
m |
100-200 |
Installation Instructions
1. Firstly, the road surface should be cleaned to ensure that there are no debris on it, and it is even better to clean it with clean water. Repair cracks larger than 0.6cm on the road surface, and the repair materials can be asphalt concrete, asphalt sand, or cement mixed soil according to different situations.
2. Hot asphalt distributor can be used to spray adhesive layer oil on the road surface, and the amount of oil can depend on the oil absorption rate of the road surface. The general dosage is between 0.9-1.2kg/m2, and asphalt with an oil grade of 60 or above is generally used.
3. When laying geotextiles, it is necessary to ensure that the roll material is at a certain height on the ground. After the non-woven geotextile is tensioned and straightened, it is then bonded with the adhesive layer oil, brushed with a brush, and rolled with a steel roller.
4. After the fabric is fully combined with the adhesive layer oil, sprinkle non crushed stones on it. Non crushed stones are usually made of melon seed flakes or medium coarse sand. The amount of crushed stones depends on the oil leakage on the surface of the fabric, usually around 2m3/km2.
5. When laying geotextiles on a large area, fixed devices can be considered at the horizontal overlap of the fabric depending on the specific situation.
Company Profile
Our Advantages
Certifications
FAQ
Q: Are you a factory or a trading company?
a: We are a professional manufacturer specializing in geosynthetic membranes, geotextiles, composite geosynthetic membranes, etc., with over 20 years of ISO9001 certification.
Q: Where is your factory? How can I visit there?
Our factory is located at the south end of Xingguo Street, Economic Development Zone, Lingcheng District, Dezhou City, Shandong Province, China.
You can take a plane to Jinan Yaoqiang International Airport, and then we will pick you up.
Q: Can you send samples before order confirmation?
Yes, if you need it, we would be happy to send you free samples for evaluation.
Q: How long is your delivery time?
a: Usually within 5-10 days after receiving the deposit.
Q: Can you produce products according to customer requirements?
Of course, we are a professional manufacturer, and both OEM and ODM are welcome.