1.2mm 1.5mm 1.8mm Composite Sling Waterproof Board for Tunnel Protection Waterproof Lining for Tunnel Culvert Roof

• Customization: Available
• After-sales Service: 3year
• Warranty: 3year
• Model NO.: 1.2mm-3.0mm
• Color: White
• Application: Electrical Engineering, Roads & Railways & Airports Project, Water Conservancy Project, Waterproof
• Function: Reinforcement
• Classification: Tunnel Waterproof Board
• Material: HDPE
• Type: Tunnel Waterproof Board
• Ceiling Tile Shape: Roll
• Thickness: 1.2mm
• Certification: ISO, MSDS, CE, Tunnel Seepage Control
• Usage: Outdoor, Indoor
• After-Sales01: 3year
• Ceiling Tile Type: EVA
• Surface Treatment: Tunnel Waterproof Board
• Tunnel Waterproof Board: Tunnel Waterproof Board
• EVA Waterproof Board: EVA Waterproof Board
• Transport Package: PE Geomembrane
• Specification: 6m*50m
• Trademark: Sentai
• Origin: Dezhou City, Shandong Province
• HS Code: 4008210000
• Production Capacity: 2000000
• Package Size: 605.00cm * 55.00cm * 55.00cm
• Package Gross Weight: 300.000kg
• Lead Time: 3 days (1 - 100 Square Meters) ; To be negotiated ( > 100 Square Meters)

Product Description

 

Product Description

1) Choose this type of thermoplastic with rubber like elasticity to give the finished product good flexibility. This is incomparable to traditional waterproofing membranes, which makes the detailed treatment of edges, pipes, etc. quite simple and fast;
2) High tear resistance, good puncture resistance, good waterproof, impermeable, and hydrolysis resistance;
3) Specially adding antibacterial agents to the material to prevent microbial erosion and prolong the product's service life;
4) Good resistance to root penetration, especially suitable for planting roofs;
5) Composite products have a wide range of adaptability to adhesives and can combine well with various adhesives;
6) There are no special requirements for the moisture content of the base layer. As long as there is no clear water, normal construction can be carried out without any impact on the construction quality;

1. High tensile strength, above 16Mpa at room temperature; The elongation at break is high, reaching over 550% at room temperature; Good stress cracking resistance, easy to adapt to water expansion, cracking, and other adhesive properties of the structure;
2. The low-temperature bending performance is very good, and it still has good bending performance below -35 ºC; Can adapt well to changes in environmental temperature;
3. Soft texture, good adhesion to the base layer, and convenient laying construction;
4. It is resistant to corrosion and mold in media such as acid, alkali, and salt, and has stable properties for acid, alkali, and other chemical substances in concrete or sand. It is suitable for underground engineering such as tunnels and civil engineering.
5. Good construction performance: The lap joint of the roll material can be hot-melt welded to achieve the desired construction effect.

 

Product Parameters

Product name	Sentai EVA waterproof board
Certification	CE, SGS, TUV, ISO9001, ISO14001,OHSAS18001
Usage	Waterproofing project
Thickness	0.2mm-3.0mm
Length	50m/roll,100m/roll,150m/roll or follow customers' request
Width	1m-8m or follow customers' demand
Surface	Smooth
Color	Black,White,Green,Blue
Material	EVA
Standard	ASTM GRI-GM13/GM17/China standard
Application	Landfills, wastewater treatment plants, subway projects, tunnels, air raid shelters, retaining dams, artificial lakes, industrial waterproofing, etc.
Packing	PP woven plastic bags tied with plastic belts,easy to unload

Installation Instructions

Welding before hanging:
1. Cut 2-3 narrow roll waterproof boards according to the planned hanging area outside the cave;
2. Then lay it flat on the ground and assemble it into a large format waterproof board that is easy to transport and hang, reducing the number of welds in the tunnel operation to improve welding quality;
3. Waterproof boards should reduce joints;
4. The splicing of waterproof boards adopts double seam welding with a heat sealing machine, and the overlap width is required to be no less than 100mm. The temperature and speed of the heat sealing machine should be controlled to ensure the quality of the welding seam.
5. The weld seam should be tight, and the effective welding width of a single weld seam should not be less than 12.5mm
.

Key points to note:
1. Before welding, the surface of the joint plate to be welded should be wiped clean, and the welding temperature and speed should be determined through testing based on the material.
2. During welding, it is important to avoid missed welding, false welding, scorching, or welding penetration.
3. The longitudinal length of the first laying along the tunnel should be about 1.0m longer than the length of the second lining construction, in order to connect with the waterproof layer of the next cycle; At the same time, it can make the waterproof layer joint and the lining concrete joint staggered by about 1.0m, which is conducive to preventing water leakage from the concrete construction joint

 

Company Profile

 Texas Sentai Environmental Protection Technology Co., Ltd. covers an area of 50 acres, with nearly 100 employees and more than 50 professional and technical personnel. We are an environmental protection technology oriented enterprise mainly engaged in the production of a series of new geosynthetic materials, specializing in the design and research and development of geosynthetic materials application, specialized production and manufacturing, construction design services, and system solution services for infrastructure construction projects such as transportation, water conservancy, environmental protection, ecological restoration, environmental governance, municipal construction, and animal husbandry. Our main products include various types of geosynthetic fabrics, geosynthetic membranes, and composite geosynthetic membranes
 

 

Our Advantages

 

FAQ

Q: Are you a factory or a trading company?
a: We are a professional manufacturer specializing in geosynthetic membranes, geotextiles, composite geosynthetic membranes, etc., with over 20 years of ISO9001 certification.
Q: Where is your factory? How can I visit there?
Our factory is located at the south end of Xingguo Street, Economic Development Zone, Lingcheng District, Dezhou City, Shandong Province, China.
You can take a plane to Jinan Yaoqiang International Airport, and then we will pick you up.
Q: Can you send samples before order confirmation?
Yes, if you need it, we would be happy to send you free samples for evaluation.
Q: How long is your delivery time?
a: Usually within 5-10 days after receiving the deposit.
Q: Can you produce products according to customer requirements?
Of course, we are a professional manufacturer, and both OEM and ODM are welcome.