The core of the geomembrane welding machine is used for hot melt/hot air welding of geomembranes (HDPE/LDPE, etc.), with high temperature control accuracy and welding strength of over 80% of the base material. Easy to operate, adaptable to different film thicknesses (0.5-3.0mm), with good seam sealing. Equipped with overload protection and temperature display functions, suitable for outdoor engineering scenarios, in compliance with geosynthetic material construction standards, ensuring the integrity of the anti-seepage system.
Product Description
1. The PID temperature control system adopts imported temperature sensors and industrial grade control chips, making temperature control more precise and stable.
2. PWM broadband speed regulation system, operating unaffected by external power fluctuations, combined with specially designed large torque motors, makes crawling smoother.
3. The improved special upper and lower pressure wheel material is more temperature resistant and wear-resistant.
4. The hot forging knife made of copper alloy formula greatly extends its service life.
Product Parameters
| Input voltage (V) |
220V |
| Frequency (HZ) |
50Hz |
| Power (W) |
800W |
| Welding speed (m/min) |
0.5-5m |
| Heating temperature (ºC) |
0-450 ºC |
| Welding material thickness (mm) |
0.2-1.5mm (can be equipped with steel wheel welding of 2.0mm) |
| Overlap width (cm) |
10cm/15cm (customizable 16cm/20cm) |
| Weld strength |
≥ 85% base metal (tensile strength in shear direction) |
Installation Instructions
1. Ground preparation: Before using the geotextile welding machine, it is necessary to clean the oil, dust, and other debris on the ground to ensure that the welding surface is clean and tidy.
2. Welding parameter setting: Select appropriate parameters such as temperature, speed, and air pressure according to the required geotextile material and thickness for welding, and make corresponding settings and adjustments to the geotextile welding machine.
3. Cold cut edge treatment: Cut the edges of the two geotextile film surfaces that need to be welded into sharp right angle edges and clean them.
4. Hot air softening: Before hot melt welding of the geomembrane, the surface of the geomembrane needs to be treated with hot air softening to ensure the firmness of the interface.
5. Adhesive welding: Place two geotextile membranes flat on the prepared welding table, start the geotextile welding machine for hot melt welding, until the interfaces of the two geotextile membranes are completely fused.
6. Quality inspection: After welding is completed, it is necessary to conduct a quality inspection on the welding interface to ensure that it is firm, free of bubbles, and has no water leakage issues.
FAQ
Q1: Are you a trading company or a manufacturer?
A1:We are a factory manufacturer.
Q2: Can I get a sample to check quality before I set up an order?
A2:Yes, of course. Samples are available and free, but sample shipping fee and express cost are on your charge. The sample shipping fee will be refunded after the official order is set.
Q3: Why choose us?
A3:
a. We are a factory manufacturing electric tools.
b. Our products has a competitive price with approved quality.
c. Strict detection during production to make sure the quality of products.
Q4: Do you support OEM/ODM service?
A4:Yes, we do support, we have an experienced R&D team to meet different needs, so welcome to place an OEM/ODM order to us.
Q5: How long is the delivery time?
A5:
a. 2-7 days for sample order.
b. 35-50 days for LCL or FCL order.
Audited Supplier 
){kind=link}